L 70 x 70 x 9

Equal and unequal leg angles · EN 10056-1:1998

L 70 x 70 x 9 is one of the Angles (EN 10056-1) of the European library (equal and unequal leg angles): 70 mm deep and 70 mm wide, 9 mm thick, 9.32 kg/m, area 11.9 cm².

hbt
Cross-section to scale
DimensionValueDescription
h70 mmOverall depth
b70 mmOverall width (flange width, or leg length)
t9 mmThickness (leg, wall or web)
r19 mmRoot radius (fillet between flange and web), or external corner radius for hollow sections
r24.5 mmToe radius of the flange, or internal corner radius for hollow sections
x20.52 mmDistance from the back of the web (or heel) to the centroid, horizontal
y20.52 mmDistance from the designated edge to the centroid, vertical
v149.5 mmDistance from the long leg edge to the major principal axis
v249.5 mmDistance from the short leg edge to the major principal axis
u129.03 mmDistance from the corner to the minor principal axis
u224.97 mmDistance from the short leg edge to the minor principal axis
u30 mmDistance from the long leg edge to the minor principal axis
G9.32 kg/mMass per metre
A11.9 cm²Cross-sectional area
AL0.272 m²/mPainting surface per metre
AG29.2 m²/tPainting surface per tonne

Section properties

The structural properties of L 70 x 70 x 9 are available in the Steel Profiles app with the European library:

  • Iy, Iz, Wel, Wpl, i
  • Iu, Iv, iu, iv and Iyz (principal axes)
  • IT
  • Bolt sizes, edge distances and net areas
  • EN 1993-1-1 compression class

The app also runs design checks to EN 1993-1-1 on L 70 x 70 x 9, finds the closest sections in the AISC, British, Canadian and Australian standards and compares it side by side with any other section.

Full properties in Steel Profiles

The free app shows L 70 x 70 x 9 with its dimensions and drawing on iPhone, iPad and Mac. The European library unlocks the complete structural properties, the design checks to Eurocode 3, the Equivalent Finder across standards and the comparison of up to three sections. Favorites, weight lists and saved sections sync through iCloud.