L 90 x 90 x 6

Equal and unequal leg angles · EN 10056-1:1998

L 90 x 90 x 6 is one of the Angles (EN 10056-1) of the European library (equal and unequal leg angles): 90 mm deep and 90 mm wide, 6 mm thick, 8.28 kg/m, area 10.5 cm².

hbt
Cross-section to scale
DimensionValueDescription
h90 mmOverall depth
b90 mmOverall width (flange width, or leg length)
t6 mmThickness (leg, wall or web)
r110 mmRoot radius (fillet between flange and web), or external corner radius for hollow sections
r25 mmToe radius of the flange, or internal corner radius for hollow sections
x24.16 mmDistance from the back of the web (or heel) to the centroid, horizontal
y24.16 mmDistance from the designated edge to the centroid, vertical
v163.64 mmDistance from the long leg edge to the major principal axis
v263.64 mmDistance from the short leg edge to the major principal axis
u134.17 mmDistance from the corner to the minor principal axis
u231.64 mmDistance from the short leg edge to the minor principal axis
u30 mmDistance from the long leg edge to the minor principal axis
G8.28 kg/mMass per metre
A10.5 cm²Cross-sectional area
AL0.351 m²/mPainting surface per metre
AG42.44 m²/tPainting surface per tonne

Section properties

The structural properties of L 90 x 90 x 6 are available in the Steel Profiles app with the European library:

  • Iy, Iz, Wel, Wpl, i
  • Iu, Iv, iu, iv and Iyz (principal axes)
  • IT
  • Bolt sizes, edge distances and net areas
  • EN 1993-1-1 compression class

The app also runs design checks to EN 1993-1-1 on L 90 x 90 x 6, finds the closest sections in the AISC, British, Canadian and Australian standards and compares it side by side with any other section.

Full properties in Steel Profiles

The free app shows L 90 x 90 x 6 with its dimensions and drawing on iPhone, iPad and Mac. The European library unlocks the complete structural properties, the design checks to Eurocode 3, the Equivalent Finder across standards and the comparison of up to three sections. Favorites, weight lists and saved sections sync through iCloud.